Simpson Safety - Simpson Racing SD1 Helmet - M - Carbon

Simpson Safety - Simpson Racing SD1 Helmet - M - CarbonSimpson's, lightest and most aerodynamic helmet, the SD1 is a premium helmet at a reasonable price. The helmet is tailored towards open wheel dirt track racing with no front vents and a front chin spoiler. NOTE: This helmet is Snell SA2020 certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the

610 in OD Steps - 1

5 in Tall - 3 in Inlet - Cotton - Chrome / Red - Universal - Each

Gauge Panel Assembly - Fuel Pressure / Oil Pressure / Oil Temperature / Tachometer / Water Temperature - 5 in / 2-5/8 in Diameter - Silver Face - Warning Light - Kit

Generations of racing mechanics have used military surplus Parker beading tools to do the job

5 in Long - 5/8-18 in Right Hand Thread - Steel - Rack and Pinion - Each

Battery - Lightweight - AGM - 12V - 1168 Pulse Cranking amps - Threaded Terminals - Top Terminal - 8

Antenna Adapter - Kenwood / Reliant / Victory - Each

5 in ID - 14 in Length - 185 lb/in Spring Rate - Steel - Copper Powder Coat - Each

Steel Sheet - 18 x 26 in - 10 Gauge - Natural - Each

Roll Bar Padding - 36 in Long - Foam - Gray - Set of 48

Fitting - Bulkhead - 90 Degree - 6 AN Male to 6 AN Male Bulkhead - Steel - Zinc Oxide - Each

Nose - MD3 Evolution - Combo - New Style - Fenders / Nose / Graphics - Plastic - Chevron Blue - Dodge Charger - Dirt Late Model - Kit