3 Inch (76mm) Flange to 4 Inch (101mm) Hose Adapter AP2

3 Inch (76mm) Flange to 4 Inch (101mm) Hose Adapter AP2Build your custom smoke and fume extraction system with hose adapters allowing you to transition between various size hoses. This part allows you to connect a 4 inch (~101mm) hose to a 3 inch (76mm) flange for the purpose of smoke and fume extraction of your laser cutter and engraver. Certain laser enclosures such as the ones from XTOOL and Creality typically include a 3 inch hose flange on the side of the enclosure. The large XTool Smoke Purifier

You can use the following parts that will fit onto the end of the EufyMake E1 Hose Adapter and allow you to transition to other hoses and hose sizes

A regular 24V 4010 radial fan is used and will plug directly into the control PCB on the tool head

Laser Crosshairs Module

NOTE THAT THE LATEST K1C AND SOME K1 MAX PRINTERS ARE BEING EQUIPPED WITH A NEWER NOZZLE STYLE

EufyMake E1 Mini Flatbed Fixture Frame

It has been updated to allow for off center placement of the coin to prevent any chance of laser reflection back towards the lens

Two more linear rods support the front of the print bed at the two side pillars of the machine

and one with cooling holes and included fans

my issue appeared to be a slight bend in the original 8mm rods which might have been pitching the print bed at the ends of its travel

Crystal Glass Trophy Fixture

This eliminates the necessity to build a large / bulky enclosure around your small and compact laser machine

xTool Air Purifier 2 (AP2) and allows for a tight 90 degree turn and then attaches to the BLACK flexible xTool hose