Bando 150-S8M-2944 C-X Ceptor TB Medium Voltage Motors

Bando 150-S8M-2944 C-X Ceptor TB Medium Voltage MotorsBando 150 S8M 2944 C X High torque power transmission : Ceptor X provides higher torque and higher power transmission than normal trapezoidal teeth due to the mesh theory of the unique curvilinear teeth and has achieved high torque and high power transmission by using high rigidity and high elasticity components. Although it varies depending on the field, it has a 2. 7 fold or more transmission capacity compared to normal STS. Low noise : As the belt

Standard NEMA MG-1 Frequency 60 Hz Voltage 200/400 V Number of poles 4 Synchronous speed 1800 rpm Output rating 1

Frame size 225 Trip type Fixed thermal and magnetic Rated current 50

Bando - 150-S8M-1040 C-X

22 VOLTS 460 AMP

Amperes 80

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1770 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3728M Mounting Arrangement F1 Number of Poles 2 Overall Length 19

2 POLES 2 NUMBER SPEEDS 1 RPM 3450 RPM 2 2850 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 208-230/460 VOLTS 208 VOLTS 2 230 VOLTS 3 460 STATOR DIAMETER 6

ECS100A2H2DB4 SPEC

3 POLES 4 NUMBER SPEEDS 1 RPM 1785 RPM 2 1785 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 326 SHAFT CODE TP MOUNTING VERT ASSEMBLY POSITION NA MOTOR TYPE RUS OPPOSITE END BEARING 7220 BEP SHAFT END BEARING 6211-J AMBIENT 40 SERVICE FACTOR 1

2 POLES 2 NUMBER SPEEDS 1 RPM 3580 RPM 4 2975 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 460 VOLTS 460 VOLTS 4 400 FRME 444 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE TCE OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING 6313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

2 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3632M Mounting Arrangement F1 Number of Poles 4 Overall Length 16