Best Fittings Microbore Hose 300mm 1/8" BSP for Cylinders brand_-Rovince

Best Fittings Microbore Hose 300mm 1/8" BSP for Cylinders brand_-RovinceThis Best Fittings microbore hose is a 300mm fill line for charging pre charged pneumatic (PCP) air rifles from a dive bottle, charging cylinder or pump. It carries a female 1 8" BSP thread at each end, the common standard across PCP filling kit, so it screws straight onto a cylinder valve or charging adaptor at one end and your rifle's probe or Foster fill connector at the other. The narrow bore is the point of it: holding only a small volume of air,

hard-working choice for anyone who wants quality kit without paying for excess

safety pins and matches for repairs and backup fire options

poultry or feathered pests will recognise it as a sensible

it weighs around 100g

this is a no-fuss cap that earns its keep without demanding attention

A MOLLE-compatible sheath is included

cutting the sharp report at the source so a shot disturbs less ground game and is kinder on the ears during pest control and close-range stalking work

while the hollow-point design drives rapid

Tighten bottom screws to 25 in/lb on dry threads before setting eye relief and levelling the reticle

shoulders and seams take the hardest wear and benefit from a heavier application

whether you're new to calling or topping up a call lanyard that's missing a dedicated teal note

Walking height adjusts from roughly 32½ to 35½ inches and seat height from 31 to 33½ inches