TC2-1 Tire Tread Cutter Electrical

TC2-1 Tire Tread Cutter ElectricalOverview EECO is pleased to offer the TC2 1 tire tread cutter for sale. The TC2 1 Tread Cutter is a stage 2 machine that cross cuts tire treads after the sidewalls have been removed, resulting in tread chunks that are easier to bale, compress, or process further. Operating the TC2 1 is easy. Simply feed the tread into the cutting wheels; the wheels will pull most treads through as they cut. The standard feeder jaw helps to safely load treads; if they

Allow the machine to fully extract the wire bead

Feed the 2 lengths of bailing wire from step 1 through the grooves in the top of the compression plate

5 inches thick

it is capable of nesting many more treads than an operator could do manually in a fraction the time

It receives a 400lb batch of colorized rubber mulch (or similar aggregate) from EECO's MD3-1 Mixing Drum and dispenses it into an Elevator Bucket Conveyor for bagging in EECO's BM1-1 Bagging Machine

CUTTING SURFACE:

The machine is semi-automatic

from the operator's position

Operating the TC2-1 is easy

Increases density of trailer loads

Gear rack assembly

Floor space: 66” x 55” (1