Skutt Lid, Slab and Body Bands for 609 Peter Pugger Voltage

Skutt Lid, Slab and Body Bands for 609 Peter Pugger VoltageKilnParts. com Part Numbers 1000313 Lid or Slab Band for 609 Kiln 1000323 Body Band for 609 Kiln Skutt Part Numbers 0346 Lid or Slab Band for 609 Kiln 0347 Body Band for 609 KilnThere are two types of bands availabel depending on the age of your kiln. Older kilns use a slightly different band, but don't worry it's easy to tell what you need! If the element pigtails inside your kiln control box form a straight line (bottom band in the image below) your

Samples are fired at Cone 5 and changes in temperatre can produce variations on the appearance

economical

Try all types of line to create depth and visual interest in your designs

This kiln will easily fire to cone 10 and gives you a full 7 cft of stacking space

Which wire is positive and which is negative

All thermocouples are made of two different metals that are welded togther at the tip and the difference in electrical properties between these two metals produces a small electrical current when heated

Crated Weight: 2

If you need to replace the band on your Skutt electric kiln

- Different organic materials may produce very different results

Strathmore 400 Series Recycled Sketch Pads

Crimp on connectors on feeder wires

New Lid lifter Design at NO EXTRA CHARGE