Harris No. 6 Bipod Adapter Stud for European Rails 3/8" brand_-Kahles

Harris No. 6 Bipod Adapter Stud for European Rails 3/8" brand_-KahlesThe Harris No. 6 Adapter is a swivel stud insert that lets you fit any Harris bipod to a rifle fitted with a European style foreend rail. European rails found on Sako, Tikka, Blaser, Anschutz, and Air Arms rifles measure approximately 3 8 inch across the slot, which is wider than the American 5 16 inch standard; without the correct adapter, a standard Harris swivel stud will not seat properly. The No. 6 slides cleanly into the 3 8 inch slot and is

and removes the reflective glare that a bare moderator can throw back when you're working behind the lamp

it strikes a practical balance between concealment

hard-wearing piece of kit from a trusted UK gundog brand

A four-point elasticated strap system holds the mask securely in place and adjusts to fit

just a few drops of the oil are worked into the wood

New Mexico

stainless or case-hardened metalwork — important for guns stored between seasons or used in wet field conditions

it absorbs the shock and recoil of the gun where it counts

each pole extends from 46 inches to 79 inches

giving clearance for scopes with an objective lens up to 56mm on most rifles without the bell touching the barrel or rail

22 rimfire and

These lightweight bullets easily handle being pushed at very high velocities to obtain flatter trajectories