Bando TL26H200 TL Timing Belt Pulley (2012) Synchro-Link TL LBando TL26H200 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//190-220/380-415 V Number of poles 4 Synchronous speed 1800 rpm Output rating 20 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC01 - ODP
34A062R706 HP
Panel type Across the line Horsepower (HP) 100 HP Main voltage 575 V Bypass type None Control options None Enclosure rating Type 3R/4/12 Attributes
9 LOCKED ROTOR TORQUE UOM OZFT KVA CODE LETTER F LOCKED ROTOR AMPS 5
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CULUS CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 34
12-0000-0368 HP 25 RPM 1180 VOLT 575 AMP 25
BP5011T01SP CARBON BRUSH - 33P
CEWDM3558-H SPEC
8 A Rated torque 134 ft
0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating IP56 KVA Code G Lifting Lugs Vertical Lifting Lugs Motor Lead Quantity/Wire Size 3 @ 4 AWG Motor Type A36056M Mounting Arrangement V1 No Load Current 14
lb Locked rotor torque 240 % Breakdown torque 240 % Locked rotor time 34s (cold) 19s (hot) Moment of inertia (J) 0
Bando - D187 Continuous improvements in materials
