Bondtech EXT-LGX-LITE B08S7LFDV6

Bondtech EXT-LGX-LITE B08S7LFDV6Details: The Bondtech LGX Lite is a filament feeder based on the LGX Large Gears extruder and uses Bondtechs new Dual Drive Technology based on larger drive gears. Each LGX Lite extruder is supplied with: 1x LGX Lite feeder; 1x 2mm Hex Key (recommended tool); 1x Powered By Bondtech sticker. Also shipping with additional accessories: 1x Push fit collar 1x 30mm PTFE tube to use in the PTFE Tube Adapter. 8x M3 square nuts for reinforcing mounting holes.

The OLED display is 1

Each unit comes assembled

Made from a unique copper alloy

0 x 16 screws to attach the fan to the fan duct 1 x M3x3 socket dome screw and M3 washer to clamp thermistor 1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge 1 x Fan Duct (Injection Moulded PC) Bowden add-on 800mm of appropriately sized PTFE tubing

Side B has an integrated "Groovemount" for a hotend that meets the Groovemount standard like E3D-V5/V6 and other types

Professional SLS 3D printed housing

EAN: 0810012581196

which has the same response as a stock Creality thermistor

The silicone sock will keep your V6 clean and free of burnt or blackened plastic as well as keep heat in hotend and off your print

Details: This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes

Details: Technical Specifications - ARM Cortex-M7 at 600 MHz - 1024K RAM (512K Tightly Coupled) - 2048K Flash (64K Reserved for Recovery & EEPROM Emulation) - 2 USB Ports

UPC: 814358015612